|
Yoke foot - two feet
Yoke foot with two adjustable feet. Suitable for cardboard boxes with divided lid, materials in sheet form etc. A large range is available.
|
Yoke foot - four feet
Yoke foot with four adjustable feet. Suitable for long, thin materials like steel sheets, board sheets etc. A large range is available.
|
Cross yoke foot
Cross yoke foot (H-shaped) with four adjustable feet. Suitable for large steel sheets, board sheets etc.A large range is available.
|
Rect. suction foot
Rectangular suction feet are suitable for handling goods with sealed surfaces such as cardboard, sheet metal, plates etc. Many sizes. |
Curved suction foot
For lifting tubular frames, axles, drums etc. Available in customized sizes.
|
|
Oval suction foot
Principally for handling sacks but also suitable for plastic shrink wrapped goods. Available in several sizes.
|
Round suction foot
Suitable for handling cans, drums, stones, bricks etc. Several diameters available.
|
Angle adaptor
Suitable for moving, for instance, sheet metal froma horizontal to a vertical position or vice versa.
|
Bottom swivel
To rotate goods 360° while keeping the control unit in a fixed position. Suitable when placing goods in confined spaces or in patterns.
|
Quick disconnections
Bayonet joint type. Upper and lower part. For fast and simple change of suction feet or tools.
|
|
Flexible control unit
Flexible extended control unit. Useful when stacking goods high up on a pallet etc. Available in various lengths.
|
Rigid control unit
Rigid extended control unit. Useful when handling wide goods. Available in various lengths.
|
Dust filter
Large dust filter. Useful in dusty environments.
|
Protection valve
For safe lifting using fixed hooks/tools. Eliminates the depression inside the lift tube if the goods are released inadvertently.
|
Universal joint
Keeps the lift tube in a vertical position if load becomes unbalanced.
|
|
Release valve
For standard control unit. Facilitates load releasing when large suction feet are used, for instance during vertical handling.
|
Release valve
For extended control unit. Facilitates load releasing when large suction feet are used, for instance during vertical handling.
|
Silencing box
Available for all electric pump sizes.
|
A2 Stainless steel versions
Vaculex VL is available in versions made of A2 Stainless steel.
|
Energy saving system
Vaculex VL is optionally available with Vaculex ATOP energy saving system. The system detects when no work is performed with the lifter and then puts the system in energy saving stand by mode. The system is very easy restarted with a remote control.
|
|
Radio Remote Control
Vaculex VL can be supplied with a radio remote control to manually turn the pump on and off from anywhere in or close to the working area.
|
|
|
|
|
|
Vaculex VL - ATEX versions (read more)
|
|
Vaculex VL
ATEX versions
|
Equipment group
|
Equipment Category
|
Explosion group
|
Maximum surface temperature
|
|
II 2G IIB T3
|
II, All other areas than mines
|
2G, can be used in zones 1 and 2.
Occasionally explosive atmosphere present due to gas.
|
IIB,
Medium flammable
|
T3, 200ºC
|
|
II 3G IIB T3
|
II, All other areas than mines
|
3G, can be used in zone 2.
Normally no explosive atmosphere due to gas but may occur
for just a short period.
|
IIB,
Medium flammable
|
T3, 200ºC
|
|
II 2D 200ºC
|
II, All other areas than mines
|
2D, can be used in zones 21 and 22.
Occasionally explosive atmosphere present due to dust.
|
N/A
|
200ºC
|
|
II 3D 200ºC
|
II, All other areas than mines
|
3D, can be used in zone 22.
Normally no explosive atmosphere due to dust but may
occur for just a short period.
|
N/A
|
200ºC
|
|
► go to top |